used injection moulding machine KRAUSS MAFFEI KM 150-520 C2 MC 4
| warehouse no.: | 502081 |
| manufacturer: | KRAUSS MAFFEI |
| type: | KM 150-520 C2 MC 4 |
| controller: | |
| year of construction: | 2001 |
| operation hours: | 44600 h |
This used injection molding machine from manufacturer Krauss Maffei of type KM 150-520 C2 is in spite of the life of 15 years in a very good technical condition. The service checked the injection molding completely. The injection unit is with an adaption of SP 520 to SP 390 and this is equipped with a 35 mm plastification. You could buy the machine from our warehouse in Langenfeld near Cologne and Dusseldorf, including a previous test run. We sell our injection molding machines with a defined guarantee.
technical data clamping unit
| clamping force: | 1500 | kN |
| distance between tie-bars h x v: | 500 x 500 | mm |
| size of mould plates h x v: | 780 x 785 | mm |
| min. mould height: | 400 | mm |
| max. open daylight: | 900 | mm |
| opening stroke: | 500 | mm |
| ejector stroke: | 150 | mm |
| ejector force: | 22 | kN |
| centering diameter of moving platen: | 160 | mm |
| centering diameter of fixed platen: | 160 | mm |
| weight of mould: | 1650 | kg |
technical data injection unit
| screw diameter: | 35 | mm |
| swept volume: | 156 | ccm |
| injection pressure: | 2429 | bar |
| screw length: | 20 | l/d |
| screw speed: | 356 | min |
| plasticising rate: | 36 | g/s PS |
| injection rate into the open: | 275 | g/s PS |
| number of heating zones: | 5 |
measures & weight
| measures of machine l x w x h: | 4.6m x 1.55m x 2.19m | |
| total weight: | 7000KG | |
equipment included
Videos
