used injection moulding machine ENGEL VICTORY 330H/80V/90 combi
| warehouse no.: | 503504 |
| manufacturer: | ENGEL |
| type: | VICTORY 330H-80V-90 combi |
| controller: | CC200 |
| year of construction: | 2007 |
| operation hours: | 47791 h |
get offer by contact form
get offer by email
PDF downloadWe offer here a 2-component ENGEL injection moulding machine with a 2-station rotary table RD 700 with hydraulic drive (hydraulic motor/proportional valve)
Rotary movement 180 degrees swinging against fixed stop.
The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H.
The 2nd vertical injection unit 80V is equipped with a 22 mm plastification.
The injection volume is 38 ccm with 1590 bar injection pressure.
The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H.
The 2nd vertical injection unit 80V is equipped with a 22 mm plastification.
The injection volume is 38 ccm with 1590 bar injection pressure.
technical data clamping unit
| clamping force: | 900 | kN |
| size of mould plates h x v: | 740 x 680 | mm |
| min. mould height: | 243 | mm |
| max. open daylight: | 743 | mm |
| opening stroke: | 500 | mm |
| round table diameter: | 700 | mm |
| centering diameter of fixed platen: | 125 | mm |
technical data injection unit
| screw diameter: | 35 | mm |
| swept volume: | 154 | ccm |
| injection pressure: | 1600 | bar |
| screw length: | 20 | l/d |
| screw stroke: | 160 | mm |
| screw speed: | 400 | min |
| plasticising rate: | 21 | g/s PS |
| injection rate into the open: | 151 | g/s PS |
| number of heating zones: | 4 | |
| nozzle stroke: | 250 | mm |
measures & weight
| measures of machine l x w x h: | 4.5m x 1.45m x 2.7m | |
| total weight: | 9300KG | |
equipment included
- screen text german
- screen text english
- core pulling hydraulically 1x
- machine with rotary index table
- machine incl. water flow regulator
- machine without material hopper
- Anti vibration mounts
- interface for ejector plates safety
- Schuko-socket 10A
- mould heating 8x
- Injection moulding machine for two components
Videos
