used injection moulding machine DEMAG Ergotech-Viva 500-270
| warehouse no.: | 502991 |
| manufacturer: | DEMAG |
| type: | Ergotech viva 500-270 |
| controller: | NC4 |
| year of construction: | 2003 |
| operation hours: | 69769 h |
Our offer is the injection molding machine from the German manufacturer DEMAG of the type ergotech - viva 500-270 from the year of construction 2003.
The maximum clamping force is 500 kN (50 ton) and the maximum swept volume is 144 ccm, which is made possible by the plasticizing screw with 35 mm diameter. The installation height for the injection molding tool is a minimum of 210 mm and the opening stroke of the movable clamping plate is 400 mm. This results in a maximum distance between the mould plates of 610 mm. The diameter of the centering on the fixed and movable platen is 125 mm.
In order to enable you to purchase the injection moulding machine without great risk, a review and technical check of the machine function is carried out with the support of experienced Sumitomo-Demag service technicians. Founded defects are eliminated with spare parts after the inspection.
The DEMAG injection molding machine was manufactured, produced and developed in Germany at the Wiehe plant. Sumitomo-Demag offers a complete sales and service network with the help of representatives and subsidiaries and thus achieves important present and customer-oriented support.
technical data clamping unit
| clamping force: | 500 | kN |
| distance between tie-bars h x v: | 355 x 355 | mm |
| size of mould plates h x v: | 540 x 540 | mm |
| min. mould height: | 210 | mm |
| max. open daylight: | 610 | mm |
| opening stroke: | 400 | mm |
| ejector stroke: | 150 | mm |
| ejector force: | 41 | kN |
| centering diameter of moving platen: | 125 | mm |
| centering diameter of fixed platen: | 125 | mm |
| weight of mould: | 580 | kg |
technical data injection unit
| screw diameter: | 35 | mm |
| swept volume: | 144 | ccm |
| injection pressure: | 1890 | bar |
| screw length: | 20 | l/d |
| screw stroke: | 150 | mm |
| plasticising rate: | 114 | g/s PS |
| injection rate into the open: | 24 | g/s PS |
| number of heating zones: | 4 | |
| nozzle stroke: | 200 | mm |
measures & weight
| measures of machine l x w x h: | 3.8m x 1.15m x 1.77m | |
| total weight: | 2500KG | |
