used injection moulding machine BATTENFELD TM 750-210
| warehouse no.: | 503048 |
| manufacturer: | BATTENFELD |
| type: | TM 750-210 |
| controller: | UNILOG B4 |
| year of construction: | 2002 |
| operation hours: | 68798 h |
The used Battenfeld injection molding machine TM 750-210 is, like all machines of the TM series, characterized by the perfect combination of sophisticated toggle lever technology and the most modern design principles.
Thanks to this robust, but precise construction, a machine was constructed that is reliable and productive even when it is "used".
Professional machine cleaning is always the basis of our used machine inspection. This is the only way to correctly identify and evaluate leaks and weak points.
In the next step, the machine is put into operation and tested in trial operation. Defects that could make a final inspection by the Battenfeld technician more difficult are eliminated in advance.
Only when the service professional gives the green light do we classify the machine as ready for sale.
So you can be sure that our motto: USED.GEPRÜFT.GUT also applies to this Battenfeld TM 75-210.
Thanks to this robust, but precise construction, a machine was constructed that is reliable and productive even when it is "used".
Professional machine cleaning is always the basis of our used machine inspection. This is the only way to correctly identify and evaluate leaks and weak points.
In the next step, the machine is put into operation and tested in trial operation. Defects that could make a final inspection by the Battenfeld technician more difficult are eliminated in advance.
Only when the service professional gives the green light do we classify the machine as ready for sale.
So you can be sure that our motto: USED.GEPRÜFT.GUT also applies to this Battenfeld TM 75-210.
technical data clamping unit
| clamping force: | 750 | kN |
| distance between tie-bars h x v: | 370 x 370 | mm |
| size of mould plates h x v: | 590 x 590 | mm |
| min. mould height: | 200 | mm |
| max. mould height: | 400 | mm |
| max. open daylight: | 730 | mm |
| opening stroke: | 330 | mm |
| ejector stroke: | 100 | mm |
| ejector force: | 26 | kN |
| centering diameter of moving platen: | 125 | mm |
| centering diameter of fixed platen: | 125 | mm |
technical data injection unit
| screw diameter: | 30 | mm |
| swept volume: | 106 | ccm |
| injection pressure: | 2042 | bar |
| screw length: | 22 | l/d |
| screw stroke: | 150 | mm |
| screw speed: | 310 | min |
| screw torque: | 490 | N |
| plasticising rate: | 18 | g/s PS |
| injection rate into the open: | 117 | g/s PS |
| number of heating zones: | 4 | |
| nozzle stroke: | 250 | mm |
measures & weight
| measures of machine l x w x h: | 3.7m x 1.3m x 1.7m | |
| total weight: | 3000KG | |
