used injection moulding machine BATTENFELD TM 75-210
| warehouse no.: | 503049 |
| manufacturer: | BATTENFELD |
| type: | TM 75-210 |
| controller: | UNILOG B4 |
| year of construction: | 2008 |
| operation hours: | 47998 h |
This used and tested injection molding machine, Battenfeld TM-75-210, is characterized, like all machines of the TM series, by an excellent combination of proven toggle lever technology and the most modern design principles.
Thanks to this robust and yet precise construction, a machine was designed which, even as a "used one", still performs a reliable and productive service.
The professional cleaning of the machine is always the basis of our inspection of the used machines. Only then can leaks and weak points be properly detected and assessed.
In the next step, the machine is put into operational readiness and is put through its paces in a dry run. Defects that could hinder a final final inspection by the Battenfeld fitter are eliminated in advance.
We only classify the machine as ready for sale when the service professional gives his OK.
So you can be sure that our credo GEBRAUCHT.GEPRÜFT.GUT also applies to this Battenfeld TM 75-210.
Thanks to this robust and yet precise construction, a machine was designed which, even as a "used one", still performs a reliable and productive service.
The professional cleaning of the machine is always the basis of our inspection of the used machines. Only then can leaks and weak points be properly detected and assessed.
In the next step, the machine is put into operational readiness and is put through its paces in a dry run. Defects that could hinder a final final inspection by the Battenfeld fitter are eliminated in advance.
We only classify the machine as ready for sale when the service professional gives his OK.
So you can be sure that our credo GEBRAUCHT.GEPRÜFT.GUT also applies to this Battenfeld TM 75-210.
technical data clamping unit
| clamping force: | 750 | kN |
| distance between tie-bars h x v: | 370 x 370 | mm |
| size of mould plates h x v: | 590 x 590 | mm |
| min. mould height: | 200 | mm |
| max. mould height: | 400 | mm |
| max. open daylight: | 730 | mm |
| opening stroke: | 330 | mm |
| ejector stroke: | 100 | mm |
| ejector force: | 26 | kN |
| centering diameter of moving platen: | 125 | mm |
| centering diameter of fixed platen: | 125 | mm |
technical data injection unit
| screw diameter: | 30 | mm |
| swept volume: | 106 | ccm |
| injection pressure: | 2042 | bar |
| screw length: | 22 | l/d |
| screw stroke: | 150 | mm |
| screw speed: | 310 | min |
| screw torque: | 490 | N |
| plasticising rate: | 18 | g/s PS |
| injection rate into the open: | 117 | g/s PS |
| number of heating zones: | 4 | |
| nozzle stroke: | 250 | mm |
measures & weight
| measures of machine l x w x h: | 3.7m x 1.3m x 1.7m | |
| total weight: | 3000KG | |
