used injection moulding machine BATTENFELD TM 1300-525 UNILOG B2
| warehouse no.: | 502078 |
| manufacturer: | BATTENFELD |
| type: | TM 1300-525 UNILOG B2 |
| controller: | |
| year of construction: | 2000 |
| operation hours: | 51055 h |
Due to the cycle time of 38 seconds of finished products on the machine, the machine is in an exceptional condition. You can purchase these secound hand machine from Battenfeld with us and visit prior to delivery in the test run. The machine is available from the end of October. For connection of auxiliary equipment, the injection molding machine is equipped with a socket combination, the connected load is up to 26.8 kilowatts.
technical data clamping unit
| clamping force: | 1300 | kN |
| distance between tie-bars h x v: | 470 x 470 | mm |
| size of mould plates h x v: | 670 x 670 | mm |
| min. mould height: | 225 | mm |
| max. mould height: | 500 | mm |
| max. open daylight: | 930 | mm |
| opening stroke: | 430 | mm |
| ejector stroke: | 140 | mm |
| ejector force: | 26 | kN |
| centering diameter of moving platen: | 125 | mm |
| centering diameter of fixed platen: | 125 | mm |
technical data injection unit
| screw diameter: | 45 | mm |
| swept volume: | 251 | ccm |
| injection pressure: | 1659 | bar |
| screw length: | 22 | l/d |
| screw stroke: | 200 | mm |
| screw speed: | 318 | min |
| screw torque: | 770 | N |
| plasticising rate: | 38 | g/s PS |
| injection rate into the open: | 167 | g/s PS |
| number of heating zones: | 4 | |
| nozzle stroke: | 350 | mm |
measures & weight
| measures of machine l x w x h: | 4.8m x 1.4m x 2.1m | |
| total weight: | 4800KG | |
