used injection moulding machine BATTENFELD TM 100-350
| warehouse no.: | 503052 |
| manufacturer: | BATTENFELD |
| type: | TM 100-350 |
| controller: | UNILOG B4 |
| year of construction: | 2007 |
| operation hours: | 39184 h |
Battenfeld TM injection molding machines have been equipped with proven toggle-system technology for years and enable the reliable production of plastic injection molded parts with short cycle times. The technical check begins with the hydraulics via the injection unit, clamping unit, pump unit and ends with the UNILOG B4 control terminal.
The distance between the bars is 420 x 420 mm and the minimum installation height of 200 mm with an opening daylight of 380 mm define the injection mould dimensions. The screw diameter is 35 mm and can be changed at an additional cost.
The distance between the bars is 420 x 420 mm and the minimum installation height of 200 mm with an opening daylight of 380 mm define the injection mould dimensions. The screw diameter is 35 mm and can be changed at an additional cost.
technical data clamping unit
| clamping force: | 1000 | kN |
| distance between tie-bars h x v: | 420 x 420 | mm |
| size of mould plates h x v: | 640 x 640 | mm |
| min. mould height: | 200 | mm |
| max. mould height: | 450 | mm |
| max. open daylight: | 830 | mm |
| opening stroke: | 380 | mm |
| ejector stroke: | 150 | mm |
| ejector force: | 41 | kN |
| centering diameter of moving platen: | 125 | mm |
| centering diameter of fixed platen: | 125 | mm |
technical data injection unit
| screw diameter: | 35 | mm |
| swept volume: | 169 | ccm |
| injection pressure: | 2083 | bar |
| screw length: | 22 | l/d |
| screw stroke: | 175 | mm |
| screw speed: | 397 | min |
| screw torque: | 621 | N |
| plasticising rate: | 21 | g/s PS |
| injection rate into the open: | 134 | g/s PS |
| number of heating zones: | 1+3 | |
| nozzle stroke: | 250 | mm |
measures & weight
| measures of machine l x w x h: | 4m x 1.32m x 2.09m | |
| total weight: | 3600KG | |
