used injection moulding machine BATTENFELD HM 2700-2200
| warehouse no.: | 503037 |
| manufacturer: | BATTENFELD |
| type: | HM 2700-2200 |
| controller: | UNILOG B4 |
| year of construction: | 2004 |
| operation hours: | 43958 h |
This used and tested injection molding machine BATTENFELD HM 2700-2200 is characterized by the perfect combination of 3-plate technology and effective construction principles. Of course, this applies to all Battenfeld machines in the HM series.
The BATTENFELD HM 2700-2200 is equipped with a 2200 injection side and a 65 mm screw, with a theoretical stroke volume of 1078 cm³.
Six heating zones ensure precise temperature control of the material.
Further advantages of this machine are 2 hydraulic core pulls, air valves and the EUROMAP interface for operating the robot.
In addition, the HM 2700-2200 is also equipped with the UNIROB R20S linear robot - also from Battenfeld.
The first step for used machines in our technical center is always the professional cleaning of the machines.
This is achieved by external service providers who can fall back on many years of professional experience.
We can only correctly assess leaks, damage and weak points on the basis of a clean machine.
In the next step, the machine is ready for a test run and is put through its paces during a simulated production run.
After all, the BATTENFELD service professionals still have to be satisfied, only then will the machine be ready for sale.
According to our motto USED.TESTED.ALL RIGHT, this BATTENFELD HM 2700-2200 is also prepared for use in your production.
The BATTENFELD HM 2700-2200 is equipped with a 2200 injection side and a 65 mm screw, with a theoretical stroke volume of 1078 cm³.
Six heating zones ensure precise temperature control of the material.
Further advantages of this machine are 2 hydraulic core pulls, air valves and the EUROMAP interface for operating the robot.
In addition, the HM 2700-2200 is also equipped with the UNIROB R20S linear robot - also from Battenfeld.
The first step for used machines in our technical center is always the professional cleaning of the machines.
This is achieved by external service providers who can fall back on many years of professional experience.
We can only correctly assess leaks, damage and weak points on the basis of a clean machine.
In the next step, the machine is ready for a test run and is put through its paces during a simulated production run.
After all, the BATTENFELD service professionals still have to be satisfied, only then will the machine be ready for sale.
According to our motto USED.TESTED.ALL RIGHT, this BATTENFELD HM 2700-2200 is also prepared for use in your production.
technical data clamping unit
| clamping force: | 2700 | kN |
| distance between tie-bars h x v: | 710 x 630 | mm |
| size of mould plates h x v: | 1020 x 940 | mm |
| min. mould height: | 350 | mm |
| max. mould height: | 650 | mm |
| max. open daylight: | 1200 | mm |
| opening stroke: | 550 | mm |
| ejector stroke: | 200 | mm |
| ejector force: | 59 | kN |
technical data injection unit
| screw diameter: | 65 | mm |
| swept volume: | 1078 | ccm |
| injection pressure: | 1777 | bar |
| screw length: | 22 | l/d |
| screw stroke: | 325 | mm |
| screw speed: | 294 | min |
| screw torque: | 2340 | N |
| plasticising rate: | 68 | g/s PS |
| number of heating zones: | 6 | |
| nozzle stroke: | 500 | mm |
measures & weight
| measures of machine l x w x h: | 5.73m x 1.82m x 2.2m | |
| total weight: | 13000KG | |
equipment included
technical data robot-system
| handling type: | Roboter | |
| manufacture: | Battenfeld | |
| controller: | R20S | |
| year of construction: | 2004 | |
